Rapier
03-28-2006, 11:56 AM
Guys, If you have been loading for a few years, start saving your hard earned $ and get yourself an RCBS motorized verion of the Trim Pro and a 3 way cutter set. Yep, I know, it is expensive.
I hate brass prep, but is a very necessary step for A+ accuracy. The Trim Pro is just a Cracker Jack piece of reloading equipment. If you also get a Prep Station, and set them up together, brass preperation is no longer a long drawn out problem.
Been doing this prep business for 42 years and thought I had it pretty well down pat. Graduated to a benchrest cutter, etc. Then I decided to try the Trim Pro, jez what a difference, cut to length, outside neck champhered and inside neck champfered, all at one operation, stick the case on the primer pocket uniformer, done.
Ed
I hate brass prep, but is a very necessary step for A+ accuracy. The Trim Pro is just a Cracker Jack piece of reloading equipment. If you also get a Prep Station, and set them up together, brass preperation is no longer a long drawn out problem.
Been doing this prep business for 42 years and thought I had it pretty well down pat. Graduated to a benchrest cutter, etc. Then I decided to try the Trim Pro, jez what a difference, cut to length, outside neck champhered and inside neck champfered, all at one operation, stick the case on the primer pocket uniformer, done.
Ed