Hunt Chat

Hunt Chat (http://www.huntchat.com/index.php)
-   Military/Surplus Arms (http://www.huntchat.com/forumdisplay.php?f=64)
-   -   Mauser M48 stripped bolt. (http://www.huntchat.com/showthread.php?t=45510)

jplonghunter 05-30-2007 05:54 PM

Mauser M48 stripped bolt.
 
Need M48 stripped bolt if anyone has an extra give me a holler.
jplonghunter

Catfish 05-30-2007 06:03 PM

48????? Do you mean 98?

Gil Martin 05-31-2007 03:42 PM

Yugoslavian Model 48 bolt
 
You might try Gun parts Corporation at www.gunpartscorp.com or Sarco, Inc at www.sarcoinc.com. Hope this helps. All the best...
Gil

jplonghunter 05-31-2007 06:05 PM

Catfish
It is a 98 Mauser made in Yugoslavia. Identical to 98K except 1/4" shorter.
jplonghunter

jplonghunter 05-31-2007 06:07 PM

Gil
Thanks for the tip. Gun parts has them for $27.00.
jplonghunter

Joe Boleo 06-02-2007 07:54 PM

Gil
 
You really know your stuff about these surplus arms. Take care...
Joe

Gil Martin 06-05-2007 06:19 PM

Joe
 
Thanks for the kind words. Finding surplus parts can sometimes be a challenge. Glad things worked out for jplonghunter. All the best...
Gil

jplonghunter 06-16-2007 06:32 AM

Gil

When I tried to order,was told out of stock. Any other suggestions? I have tried Sarco,Hoosier Gun Works, Inter-Ordinance,Springfield Sporters,and Samco. As always thanks for assist.

jplonghunter

Gil Martin 06-16-2007 07:04 PM

Marstar
 
I have found some surplus parts at Marstar at www.marstar.ca. These folks are swell and very helpful. Be advised that parts from Canada may have a wait at the border until they clear Customs. Hope this helps.

There is another option. You could buy a Model 48 in rough condition or with a bad bore and have a parts gun.
All the best...
Gil

jplonghunter 06-17-2007 06:55 AM

Gil

As always you are the man. Thanks and I will take advice on locating rough action.

jplonghunter

jplonghunter 08-03-2007 05:50 PM

Finally found M48 stripped bolt at Forrest Products in California.

Gil Martin 08-03-2007 06:50 PM

I like a story with a happy ending
 
Glad it worked out. All the best...
Gil


All times are GMT -5. The time now is 02:29 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.