![]() |
Removing the barrel from a 9422
Just aquired a Winchester 9422 in .22 WMR as I want to fit a silencer ( dont worry its OK in the UK ) any advice on how to remove the barrel from the action so I can thread it would be appreciated
|
If I remember correctly you need to remove the breakdown screw then the barrel slips out, if I am not remembering correctly it MAY be one of the threaded in barrels.
GoodOlBoy |
The locating pin is out but the barrel is mighty tight in the receiver :( however my lathe man thinks he can manage to cut the thread with the receiver still attached , only downside is the silencer will have to be unscrewed to reload , worth it to take the " bark " off :)
|
You should be able to find a take down digram some where on the web. I would start with the Winchester web page, or gogle 9922 scamitic.
|
Eggy,
I would ask Winchester since they built the thing, eh, wot? Just what does "a Silencer is ok in the UK" mean? Are there Registration Restrictions? If not, please convey that logic to the BATFE in the USA! After all, we are the Former Colonies and may have missed the "Silencer ok" Business, eh, wot? Adam |
|
Quote:
|
Eggy,
How very Logical your last post was. I wonder WHY you need a License with, or without, "name/number." I understand your Constitution is unwritten and that may cause some problems when you choose to EXERCISE your gun Rights. We Colonials had the wit, and wisdom, to put our Gun Rights into our written Constitution and we know where we stand. Where are your Gun Rights in your Unwritten Constitution? Now, there you go, pip, pip! Be well. Adam |
Quote:
|
All times are GMT -5. The time now is 11:07 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.