|
I have a winchester 1200 and a remington 870, and the field strip is similar. I haven't gone too far down into its guts, but first, off comes the barrel. Then the forend. After those, you can take the magazine cap out, (but be careful, because the spring tends to shoot out) and dump its contents. Poke out the trigger pins, and you can remove the trigger mechanism, but make sure it's on safe. As for the bolt, I think it's the same as the 870,(haven't tried) but the trigger mechanism has to be taken out before it. Just push in that metal clip thing in(same as the 870) and try pushing it forward. I'll write again soon if I end up trying to take it out.
|