[Rancid Crabtree]

Then I cut a slot for the shoulder strap.



Next, I added a piece to the bottom of the quiver that I could attach the other end of the shoulder strap to.





And then gave it a bit of decoration and some stitching holes.





Stitching the already rolled tube proved to be a real pain.





For the bottom of the quiver, I used a piece of 3/4 inch thick pine.



And then added a layer of foam to reduce the noise.



The bottom is held in place with decorative nails.





I do not have a large enough piece of leather to make a continuous shoulder strap so I have to join a few strips together that I cut out of one of my bigger pieces.