|
270man, What did I use to move the allen screws? I cheated and used a T6 torx tip with about half of the tip cut off with a cut-off in the moto-tool. That way it can be held under pressure and won't break off (those screws can be tighter than heck) and very seldom strips the screw like an allan wrench does invariably. (Notice I didn't say never strips the screw). I usually have about three of the T6 tips here because they do catch heck. Good luck!If you can tell me what will dissolve the sealer on those screws, I will love you forever.
|