|
|
|
|
#1
05-12-2014, 07:10 AM
|
|||
|
|||
|
Knife from a saw blade
This blade is over an 1/8 of an inch thick. I am using a 24 inch diameter concrete saw blade.
 I cut a chunk of it away with a angle grinder.  This will be a hunting knife with a drop point and a finger guard.  This is a very thick blade.   Next, I heated the blade cherry red and let it cool very slowly to soften the steel. so I could drill hole and grind a bevel and do some file work.  this time I am going to do a "W" pattern on the backbone of the blade. I marked off the spacing with a sharpie.  Then I used a small square file on one side of the blade.  Then turned the blade around and did the other side.  I added a little bluing to bring out the details.   With all the file work done, I heat treated the blade by heating it until it was non magnetic (around 1500F) and then quenched it in 130F salt water. Next I temper it at 400F for one hour. Finally I polish the blade to a mirror finish. I used curly maple and aluminum pins. I'm calling it "Blonde"     
__________________
http://staysharpguide.com/ 
|
|
#2
05-12-2014, 07:11 AM
|
|||
|
|||
|
The last step is to make a sheath. I use 7 Oz. Veg. tanned leather and then dye it to the color I want after I sew it.
    Another knife from the same saw blade with alum. bolsters and a Cocbolo handle. I also used homemade mosaic pins.  
__________________
http://staysharpguide.com/
|
|
#3
05-12-2014, 11:48 AM
|
|||
|
|||
|
Good grief Rancid.. You are a handy person. If I had tried to make a knife such as that I would be minus a finger or two. Looks good. And I am jealous..wish I had the talent
__________________
skeet@huntchat.com Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a well-armed lamb contesting the vote!" Benjamin Franklin
|
|
#4
05-12-2014, 11:53 AM
|
||||
|
||||
|
Amazing !
Is there anything you cant do ??
This is on my wish list: http://www.duluthtrading.com/store/p...ent#detailtabs
__________________
"The life of this aina', this land, is perpetuated in righteousness for you and I, the people..." bruddah IZ, Israel Kamakawiwo'ole
|
|
#5
05-12-2014, 12:18 PM
|
|||
|
|||
|
Quote:
Yes and my wife is generating a list. 
__________________
http://staysharpguide.com/
|
|
#6
05-13-2014, 03:56 PM
|
|||
|
|||
|
Those are really beautiful knives.
__________________
“May we never confuse honest dissent with disloyal subversion.” Dwight D. Eisenhower "If the freedom of speech is taken away, then dumb and silent we may be led, like sheep to the slaughter" George Washington Jack@huntchat.com
|
|
#7
05-14-2014, 12:09 AM
|
||||
|
||||
|
Really fine work there. That old saw blade steel is great stuff, too bad it is so hard to come by around here these days. A few years back I could have picked up three BIG sawmill blades, but just never had the money to grab them, and alas they are gone by the wayside.
Richard
__________________
(Moderator - Gear & Gadgets, Cowboy Action, SouthWest Regional, Small Game) GoodOlBoy@huntchat.com For God so loved the world, that he gave his only begotten Son, that whosoever believeth in him should not perish, but have everlasting life. - John 3:16 KJV Then I commended mirth, because a man hath no better thing under the sun, than to eat, and to drink, and to be merry: for that shall abide with him of his labour the days of his life, which God giveth him under the sun. - Ecclesiastes 8:15 KJV "The gun has been called the great equalizer, meaning that a small person with a gun is equal to a large person, but it is a great equalizer in another way, too. It insures that the people are the equal of their government whenever that government forgets that it is servant and not master of the governed." - 40th President of the United States Ronald Reagan 1911-2004
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
