|
|
|
|
#1
03-22-2006, 04:17 PM
|
|||
|
|||
What type of stone or sharpener ?
I have a medium arkansas stone and a barber razor strop stone my fater-in-law gave me many year ago, I spray WD-40 on both, I use the arkansas stone to put edge on, the I use the barber razor strop to put a keen edge on it, then I finish by stropping the knife blade on a piece of leather. It's a little more work but well worth it
|
|
#2
03-23-2006, 09:35 AM
|
||||
|
||||
|
I use a aluminum oxide ceramic "crock" stick. The ones I use are about 4" long. They never wear out, and the only time I have to use oil on them is when the get so impregnated with metal that they wont sharpen any more (Takes about 5 years of steady sharpening) Then you use a little 3 in 1 household oil on paper towel and it will pull most of the metal right off of them. Also it puts a VERY fine edge so I don't have to use anything BUT them.
12 of them cost $3.49 + S&H at smokey mountain knife works. That is about a ten lifetime supply unless you lose or break them. http://www.eknifeworks.com/webapp/eC...=96&SKU=SI1010 GoodOlBoy
__________________
(Moderator - Gear & Gadgets, Cowboy Action, SouthWest Regional, Small Game) GoodOlBoy@huntchat.com For God so loved the world, that he gave his only begotten Son, that whosoever believeth in him should not perish, but have everlasting life. - John 3:16 KJV Then I commended mirth, because a man hath no better thing under the sun, than to eat, and to drink, and to be merry: for that shall abide with him of his labour the days of his life, which God giveth him under the sun. - Ecclesiastes 8:15 KJV "The gun has been called the great equalizer, meaning that a small person with a gun is equal to a large person, but it is a great equalizer in another way, too. It insures that the people are the equal of their government whenever that government forgets that it is servant and not master of the governed." - 40th President of the United States Ronald Reagan 1911-2004
|
|
#3
05-25-2006, 08:50 PM
|
||||
|
||||
|
I have been using an old Norton Oil Stone, with three sides, for many years. When I had the Wholesale Fish business, the fish cutters used it all day long. It is still sharpening my knives.
All the new fangled systems may be fine,but I have found nothing that does a better job than this example of old technology.
__________________
May the Bonnie Blue wave forever Nemo Me Impune Lacesset
|
|
#4
05-25-2006, 10:07 PM
|
||||
|
||||
|
i'm a dmt fan personally. they are diamond hones, all you need is water.
the stone for sharpening braodheads is priceless. what a time saver, and does a great job. and it's precise. www.dmtsharp.com
__________________
HAPPY TRAILS BILL NRA LIFE MEMBER 1965 DAV IHMSA JPFO-LIFE MEMBER "THE" THREAD KILLER IT' OK.....I'VE STARTED UP MY MEDS AGAIN. THEY SHOULD TAKE EFFECT IN ABOUT A WEEK. (STACI-2006) HANDLOADS ARE LIKE UNDERWEAR...BE CAREFUL WHO YOU SWAP WITH. Last edited by BILLY D.; 05-25-2006 at 10:23 PM.
|
|
#5
05-26-2006, 06:47 AM
|
||||
|
||||
|
I can't use a stone without havin it end up concave after bout a year or two, so I use this,
http://img.photobucket.com/albums/v3...les/knifes.jpg It keeps em straight and can sharpen even my big one's to a razor's edge,,
__________________
........ "Fear nothin but God" "You will never know how much it has cost my generation to preserve your freedom. I hope you will make good use of it." ~ John Quincy Adams
|
|
#6
08-04-2006, 11:21 AM
|
|||
|
|||
|
I'm a trapper and I sharpen all my skinning knives with a sharpening system that is mounted on a bench grinder. One wheel has a fine grit on it to put on an edge and the other wheel is made of compressed paper.
It does a good job and it's very fast.
|
 |
|
|
Hybrid Mode
