|
|
|
|
#1
10-10-2007, 11:08 AM
|
|||
|
|||
fletching glue
Having a prooblem with fletchings on my carbon arrows. shooting through a whisker biscuit and the fletchings, some times one and some times two are stripping off on the first shot. not from the front but from the back by the knock. any ideas on the problem?? also what all do you use to stick them on the shaft. i have tried super glue and fletch tite but they are not lasting. i always clean the shaft with acetone before putting the glue on. thanks
__________________
This country has nothing to fear from the crooked man who fails. We put him in jail. It is the crooked man who succeeds who is a threat to this country Let us speak courteously, deal fairly, and keep ourselves armed and ready Theodore Roosevelt 
|
|
#2
10-10-2007, 11:29 AM
|
|||
|
|||
|
I use Duraloc, sold by the company that makes Duravanes. It is a super glue type of adhesive.
Perhaps the problem isn't the glue you are using. I scuff the area of the shaft where the fletching will be with sand paper, then wipe the area down with alcohol or some type of thinner. If you use the super glue (instant) type of adhesive, wipe the area with water. There is something about instant glues liking water, and not liking other solvents. Another factor that could come to play using the instant adhesives is to not use too much adhesive. A thin, constant bead down the center of the vane is all you need. With a whisker buiscuit rest, it may also help to put a drop of glue at the leading and tailing end of the vane. I do this on all vanes or feathers anyway. Good luck
|
|
#3
10-10-2007, 09:06 PM
|
|||
|
|||
|
Thanks for the information i will give it a try first thing.
__________________
This country has nothing to fear from the crooked man who fails. We put him in jail. It is the crooked man who succeeds who is a threat to this country Let us speak courteously, deal fairly, and keep ourselves armed and ready Theodore Roosevelt
|
|
#4
11-03-2007, 11:34 AM
|
|||
|
|||
|
bohning fletch-tite platinum...clean the shafts very well with acetone.
__________________
If you find yourself going thru hell, keep on going, don't stop.
|
|
#5
12-27-2007, 12:59 PM
|
||||
|
||||
|
fletch tite is good til the tube gets old,seems like it degrades with age...or I had bad luck with every tube.
I have used seal all with good results(tried it when my fletch tite was old-lol) the dab at the front and back of each vain/feather is the best way to help reduce peel off.
__________________
A shootin iron is a tool used for shootin much like a branding iron is a tool used for branding
|
|
#6
01-30-2008, 12:27 PM
|
|||
|
|||
|
I simply spray about 7'' of the end of my arrows with Rust-Oleum white lacquer. Not only does it make the arrow much more visible but causes all glues I've tried (Goat Tuff, LocTite gel and Gold Tip) to hold very well. On a plus side, it comes right off with acetone and makes removal of old vanes and glue a breeze.
|
 |
|
|
Hybrid Mode
