30-06 Cases for sale

[skeet]

I have more than a 1000 Factory new 30-06 cases Remington brand. Like to get 20.00 per 100 for them plus shipping. I also have 1000's of once fired 06 brass..all Commercial..but don't know what to sell them for.

Also have 2000 once fired 45 Colt brass..15.00 per hundred plus shipping.

Have lots(approximately 60) of bullet moulds from Lee to Hensley and Gibbs. Will look though and make a list of what I am going to sell. Let me know of any interests you may have.

And looking for some 300 Savage brass. I know I can make it out of 06 or 308 but just makes me dizzy figuring out what I'm looking at

[krshunter]

I believe I still have a bunch of .300 Savage brass and I have a Remington barrel chambered in it. I'll send it all up to you if you want it.

[Rottweiler]

I'd like to see that list of molds

[PJgunner]

I'd like to see that list of molds.
Paul B.

[skeet]

Making a list right now. But a short list is as follows H&G # 200 and 202 200 is a 357 mold for Harvey bases 202 is for 45 with the same protect bore bases. I even have the zinc washers for both. Lee Single cavity semi spire 30 cal 155 gr...RCBS DC 32 cal pistol 77 gr...Lyman 12 ga slug mold. SC Lyman 357 158 gr Round nose and a SC 148 gr Wadcutter.. A Lyman 4C 358 WC #358091 The H&G moulds are kinda pricey Lyman DC 375 264 gr Semi flat point and a 1C 375 Round nose 250 gr. More to be listed later. Oh...I also have a 2C 25 cal pistol mould and a mould for 32-20 with round nose..about 110 gr. Make any reasonable offers.

[gutshot_again]

PM sent.

[skeet]

1. LymanSC 375 RB(for 36 BP

2. Lyman SC 358250

3. Lyman SC 375167

4. Lyman 4C 358091C

5. Lyman SC 311252

6. Lyman 2C 252435DW(for 25 pistol)

7. Lyman SC 358160

8. Lyman 2C 375449

9. Lyman 311316CW(for 32-20 rifle)

10. Lyman SC 358432

11. RCBS 2C 32-077 for 32 pistol.

12. RCBS 2C 7.62-130 SPL (7.62X39)

13. Lee 440 RB

14. Lee SC 312-155-2R (pointed 155 gr bullet).

15. Lyman SC 12ga HB FN (hollow base flat nose 12 ga slug mould) I never used it but shot some a friend cast in his mould. Shot surprisingly well.

Will get more added to the list as I go through all this stuff. Some of these are new never used...came from my gun shop from years ago and ones I used of course gunner@tctwest.net or PM me..but my comp is still somewhat messed up on that. May go to another computer.

[gutshot_again]

Sent you a PM with an offer on

3. Lyman SC 375167

7. Lyman SC 358160

[gutshot_again]

Moulds arrived yesterday. Excellent condition and packed well. Thank you.

[fathertime24]

Do you still have the 32 auto mold available?
I am loading for a 32 ACP
Thanks, Ken

[skeet]

Most all that stuff is gone ...long gone. Moulds especially.