Hunt Chat  

Go Back   Hunt Chat > Tools of the Trade > Gunsmithing

Reply
 
Thread Tools Display Modes
  #1  
Old 12-19-2009, 04:38 AM
skeeter@ccia.com skeeter@ccia.com is offline
Registered User
 
Join Date: Feb 2001
Location: western pa.
Posts: 1,086
gun cleaning

I have heard about using carnuba car wax on your rifle to help keep water off..the outside that is..anyone ever use this idea? They say wax everything outside....sounds like good idea to me. Might keep water off the blue parts and wood and make easier to wipe down after day out.
__________________
mugrump
Reply With Quote
  #2  
Old 12-19-2009, 12:18 PM
Adam Helmer Adam Helmer is offline
Moderator
 
Join Date: Jun 2002
Location: Mansfield, PA
Posts: 3,865
skeeter,

As for wax, I'd say "yes" and 'No." For a wood stock, applying wax will prevent boiled linseed oil from EVER again penetrating into the wood. Applying wax to the metal may "make it easier to wipe down after a day out," but what about the water that got into the action under the stock? If I get a gun soaked, I detail strip it, dry the metal and reoil and set the stock near the woodstove for a day or two to dry out inside. All my stocks have a coat or two of boiled linseed oil inside and out.

Applying wax will not preclude detail stripping a drenched gun, so I never use wax.

Adam
__________________
Adam Helmer
Reply With Quote
  #3  
Old 12-19-2009, 05:28 PM
Jack Jack is offline
Moderator
 
Join Date: Jun 2002
Location: Georgia
Posts: 6,087
I've used wax on gunstocks, but not on metal.
I have heard of the procedure of taking the action out of the stock, waxing all the metal, and then reassembling. I suspect it would work, short term, but I haven't tried it.
__________________
“May we never confuse honest dissent with disloyal subversion.”
Dwight D. Eisenhower
"If the freedom of speech is taken away, then dumb and silent we may be led, like sheep to the slaughter"
George Washington
Jack@huntchat.com
Reply With Quote
  #4  
Old 12-20-2009, 12:20 AM
skeet skeet is offline
Moderator
 
Join Date: Jan 2002
Location: Northwest Wyoming
Posts: 4,614
Waxing

Works real well for getting the hair off..oops..wrong idea. I used to wax my ol 1100 on the outside....and waxed the ends of the stock and inside the forend. Not too keen on boiled linseed myself. Never seems to really get dry. I was guiding and we had lots of nasty weather. Helped a bit I guess. But when it got really nasty I always took it apart and cleaned anyway. But it did keep it from getting too bad. After cleaning with oil etc I had to re wax anyway. If it got dropped in the river or bay..once in the ocean..I detailed it and put an extra stock and forend on. A dry one. Lots of stuff happened while duckin..Friend dropped my 6 cell mag lite overboard one morning. It was on. Found it 30 mins later while movin some decoys. Still on. fished it out by the lanyard I had on it with a boat hook. It had been waxed and I still have it. Salt water too down on Assateague Island. I did clean it up a bit later that night.

A guy I hunted with some lost his Auto 5 in the Nanticoke river.. in 5 ft of water. Found it about 5 days later..on a really low tide..Nothing woulda helped it. Finish was GONE.
__________________
skeet@huntchat.com

Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a well-armed lamb contesting the vote!"
Benjamin Franklin
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:46 PM.


Powered by vBulletin® Version
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.