Hunt Chat  

Go Back   Hunt Chat > Tools of the Trade > Reloading Bench

Reply
 
Thread Tools Display Modes
  #1  
Old 03-25-2005, 07:24 AM
357Maximum 357Maximum is offline
Registered User
 
Join Date: Jul 2004
Location: Central VA
Posts: 87
Question Gas check dislodging concern

Question about a concern. I have some .360 sized GC LBT bullets for shooting in my .357max.
I crimp these in a Lee crimp die. It is somewhat difficult to ram the cartridge into the die because of the .360 bullet diameter. I have to exert quite a bit of force in order to get the bullet into the die. My concern is; Is it possible that the gas check could be forced off of the bullet inside the case due to the excessive pressure required to penetrate the die?
I believe this die must have an ID of around .362” at the collar which is pinching the case in effect resizing the cartridge.

What are your thoughts on this theory / concern?
__________________
That's an X
Reply With Quote
  #2  
Old 03-25-2005, 10:09 AM
Rocky Raab's Avatar
Rocky Raab Rocky Raab is offline
Registered User
 
Join Date: Aug 2000
Location: Ogden, Utah
Posts: 8,705
It is possible. Because the neck enters the die from the top down, the die creates the equivalent of the way your bowels work: stuff gets pushed along by contraction of the walls.

So it is possible that the gas check may get pushed off. Pulling a few bullets to find out wouldn't prove anything, because pulling them back through the neck might in fact unseat the gas check by itself.

The only way to really determine if the gas check is still in place after the crimping stage would be to x-ray them. That's hardly feasible.

I'd see if the Lee folks (or a good machinist) could open up the walls of the crimp die a few thousandths. That wouldn't affect the crimp action at all and would relieve your tight fit problem.
__________________
Freedom of the Press
Does NOT mean the right to lie!

Visit me at my Reloading Room webpage!

Get signed copies of my Vietnam novels at "Baggy Zero Four" "Mike Five Eight"
Reply With Quote
  #3  
Old 03-25-2005, 05:35 PM
357Maximum 357Maximum is offline
Registered User
 
Join Date: Jul 2004
Location: Central VA
Posts: 87
Quote:
Originally posted by Rocky Raab
It is possible. Because the neck enters the die from the top down, the die creates the equivalent of the way your bowels work: stuff gets pushed along by contraction of the walls.
That is quite possibly the most disturbing analogy I've ever heard.

The actual ID of the crimp die is .376". When I don't use them in the CD they don't chamber as well. I'm hoping my next round of tests don't show any signs of the dislodging.
__________________
That's an X
Reply With Quote
  #4  
Old 03-25-2005, 08:15 PM
Rocky Raab's Avatar
Rocky Raab Rocky Raab is offline
Registered User
 
Join Date: Aug 2000
Location: Ogden, Utah
Posts: 8,705
Thank you. Every writer strives to grab his reader's attention!
__________________
Freedom of the Press
Does NOT mean the right to lie!

Visit me at my Reloading Room webpage!

Get signed copies of my Vietnam novels at "Baggy Zero Four" "Mike Five Eight"
Reply With Quote
  #5  
Old 03-26-2005, 09:33 AM
357Maximum 357Maximum is offline
Registered User
 
Join Date: Jul 2004
Location: Central VA
Posts: 87
Quote:
Originally posted by Rocky Raab
Thank you. Every writer strives to grab his reader's attention!
Mission accomplished. I guess the "pin" is mightier than the sword, especially if it's in a grenade.

Oh, I guess thats a different pen.
__________________
That's an X
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:07 AM.


Powered by vBulletin® Version
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.