|
|
#16
05-27-2010, 11:19 PM
|
|||
|
|||
|
4198 is an extruded powder with fairly long grains. Probably not a great improvement over 3031 as far as measuring goes.
Reloder 7 is extruded, but a good deal shorter grains. My experience is that Reloder 7 is pretty easy to measure.
__________________
“May we never confuse honest dissent with disloyal subversion.” Dwight D. Eisenhower "If the freedom of speech is taken away, then dumb and silent we may be led, like sheep to the slaughter" George Washington Jack@huntchat.com 
|
|
#17
05-28-2010, 08:32 PM
|
|||
|
|||
|
Reloader 7 sounds like a good option, but i'm curious as to how well TrailBoss will meter thru a rotary style powder measure. It seems to be very fluffy, not sure whether it would meter correctly. I would like to here if anybody uses TrailBoss and how well it meters out in a rotary style measure.
|
|
#18
05-30-2010, 01:47 PM
|
|||
|
|||
|
All Ramshot powders are fine-grained ballpowders - I really have begun liking them for my handloading. I also use a Lee powder measure, the venerable Perfect Powder Measure, and it does get hinky with long-grained extruded powders. Those I use a dipper and adjust on the beam scale by weight.
|
|
#19
06-01-2010, 05:14 AM
|
|||
|
|||
|
I use a lot of 3031. I have an old Redding powder measure that works great with any powder i have used with it. I do throw the charge a little light and trickle in the rest but i don't think i would really have to.
|
 |
|
|
Linear Mode
