does load testing ever end

[Evan03]

finaly loaded up some 125 nosler balistic tipps in 3006 cases. had to bump my seater die way down to get the 125s in the kneck. theyre about 1/4" shorter than the same 165 bullets that i have scrapn nose and tail in mag belly so that they can ride on the lands at ignition.

i figured i didnt need to push the light 125s fast. thats what the 2506 is for so i looked through the nosler book and found the load that was movn the slowest that was 56.5grs of 4831 doing 2900 and some change.

i was kinda lookin for load to get 2506 like recoil from the 3006. but i think that isnt going to happen with the powders i have. 2506 useing 4831 and pushn 120s is useing bout 7grs less powder to achieve the same velocities. ooops just checked the book. the list imr4350 as the slowest 125 powder i substituted h4350, thats also theyre most acurate load with the 125.

also switched powder to h4350 pushn sierra 75s in the 2506.

aswell as trying 4831 in the 220.

then on the list to brew today are some 90gr 257 X bullets for the 2506. havent yet decided wich powder i want to try first behind these bullets.
then theres still two bullets on the reloading bench that havent been touched yet. actualy 3 50gr nos 224 bts, 75gr horn hollow points 257 and 75 vmaxes in 257.

cant belive i havent burned myself out on reloading yet. maybe the reloading phase is stickin this time. i sure hope so.

later
Evan