Couple of Questions

[buckhunter]

Kids gave me a CVA Kokak just because. Still don't understand why but I'm sure I'll find out and it will probably cost me triple what this costs. Anyway I have a couple of questions.

1. I mounted a Weaver 2 1/2 power scope on it using 418M bases and detachable mounts. I find its very difficult to raise and lower the hammer. The scope sits very close to the hammer. Its OK when I'm in a warm house but suspect it might be dangerous when my hands are half frozen. Any susggestion or different mounts to raise it.

2. I have a ton of 44 cal, 240 gr Nosler pistol bullets. I bought some Hornady Sabots in 50 Cal(.430). When I put the bullet and sabot in the barrel there is a lot of room around it. It almost appears that the bullet and sabot will fall to the breach plug. Is this normal and will the sabot tighten up as it goes down the barrel?

Thanks

I inquired at CVA. Ttheir only suggesting is to get a higher mount. No kidding.
Also they only recommend Powerbelts which I would assume to be fine however cannot believe that a Hornady 50 Cal sabot are so loose in the barrel. Iam concerned that other manufactues would not fit either.