HELP!! 270 WSM not working

[BILLY D.]

okay, now go back to the dry erase marker and color the neck all the way down to the neck shoulder juncture, run the casing all the way into the die, keep movimg the die down until you get to the neck shoulder juncture. you will see the marking start to disapper as you get lower on the casing.

now put the sized case in the chamber, does it close easily? if not extract the casing place it back in the shell holder and turn the die 1/8 turn and try the casing in the chamber again. keep doing this till the action closes without force. there should be some resistance.

good luck.