Old winchester shotguns

[Classicvette63]

gd, on the m97:

at the end of the mag tube there is a pin going thru the tube. slide the pin from one side to the other. it should be sticking out the bottom of the tube now. using the pin as something to hold onto, turn the mag tube counter-clockwise until it stops. Grab the foregrip and slide it forward. It may be pretty stiff if the gun hasn't been taken apart in some time. Sliding the grip forward will slide the mag tube out of the reciever. Now the whole barrel and mag tube assembly will turn counter clockwise from the reciever and the gun will be in two pieces.