|
|
#16
06-10-2010, 01:11 PM
|
|||
|
|||
|
happycowboy,
I would put all metal parts in a bucket of boiling hot, soapy water for an hour outdoors. Use the oil after you cooked off the crud. Adam
__________________
Adam Helmer 
|
|
#17
06-10-2010, 02:52 PM
|
|||
|
|||
|
Happycowboy, I get KROIL from Brownells at Montezuma, Ia. You can also buy it direct in large quantities. I usually get the 8 oz. can. Kano Laboratories, Nashville, TN 37211. 1-615-833-4101. e-mail: KANOLABS@aol.com also www.kanolabs.com.
|
|
#18
06-10-2010, 06:06 PM
|
|||
|
|||
|
Thank you for the advice and the tips Mr. Helmer and Larryjk. I won't have time to do much until i get back from vacation. I am pretty busy getting the last of the gear together. Me and the wife and some family are headed out to the lake for a camping trip. I am ordering the cylinder pin tomorrow though, that way it should be hear just after we get back from vacation. I do appreciate all the advice you folks have given me. I will see you folks soon
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
