MEC 600 junior

[dovehunter]

All three of my MEC 600 JRs - 12, 16, & 20 - do this occasionally, but never so badly that you can't pull them out of the die relatively easily with your thumb and forefinger. It does seem to be worse when using high brass shells. I've never considered it to be a major problem in my case. I would be inclined to suggest that you might try a very light coating of a spray lube intended for metallic cartridges (but just on the brass). You might also try checking MEC's web site to see if this issue is covered in their FAQ section (if they have one). If not, and they have a "Contact Us" tab, you may try posing this question there.