|
|
#2
04-05-2005, 06:05 PM
|
||||
|
||||
|
Imperial Sizing Die Wax is all I'm gonna say...
Well, maybe one more thing: a stuck case remover is cheap when you buy it before you need it!
__________________
Freedom of the Press Does NOT mean the right to lie! Visit me at my Reloading Room webpage! Get signed copies of my Vietnam novels at "Baggy Zero Four" "Mike Five Eight" 
|
|
#3
04-05-2005, 06:16 PM
|
||||
|
||||
|
Yep, I'll agree with the stuck case remover being cheaper if you buy it before you need it. First case I ever went to reload, I got stuck in the die. That really sucked because I didn't have a case puller.
Rocky, can I buy Imperial Sizing Die Wax from Cabelas or Outdoor World? If not, where can I get it? I have been using RCBS lube and I don't really like that stuff.
__________________
The pond, waterfowl, and yellow labs...it don't get any better.
|
|
#5
04-06-2005, 10:28 AM
|
|||
|
|||
|
Sizing Lube
Hi 338,
Rocky's right as rain .................again!!! Imperial's THE way to go. Here's a site that may help you purchase some. I get mine locally. Good luck!!! www. huntingtons.com/lubeaccessories.html#imperialwax 
|
|
#6
04-06-2005, 11:49 AM
|
||||
|
||||
|
Redding just bought the rights to the Imperial line. They'll probably be calling it Redding Wax or something. But a Google search should bring you several sources.
338, there are two kinds of stuck case removers. One of them works just as you described. The problem is that not all sizer dies allow you to remove the decapper stem from the top. The second type of case remover tackles that kind of die. With that style, you drill out and tap the primer pocket, then use a bolt and a special spacer to unscrew the stuck case. It'll work on both types of sizer die, BTW. In an emergency, a guy with a good tool chest could cobble up one of these. A drill bit, a thread tap, large washer and a big nut or nut socket would work.
__________________
Freedom of the Press Does NOT mean the right to lie! Visit me at my Reloading Room webpage! Get signed copies of my Vietnam novels at "Baggy Zero Four" "Mike Five Eight"
|
|
#7
04-07-2005, 12:51 AM
|
||||
|
||||
|
Ah yes Rocky, something akin to a gear or wheel puller. The freezer may be of some help in a not TOO bad situation. The one case I stuck a few years ago came out rather easily with a tap on a thin brass rod through the decapper stem hole in the top after a disciplinary visit to the arctic regions of my food storage area. Nearly an hour worked for me, I had other stuff to do. I just got it ready to tap out, set it in the cold and did a few other things that needed done, stuck my tongue to it to test the chill factor, (just kidding), screwed the die into the press and one sharp rap on a brass rod with a small hammer popped the case right out.
__________________
Confuse a liberal, speak the truth in plain english.
|
|
#8
04-07-2005, 09:37 AM
|
|||
|
|||
|
lube
338winmag;
...Imperial sizing die wax is great. When you see the size of the can, don't go crazy and buy a case...a little goes a long way. I am still using out of the first can I ever bought. I do have a new can on the shelf in case I ever do use up the first can. It comes in a little round can like shoe polish. Try it.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
