#1
|
|||
|
|||
Uni Nocks
I bought a dozen Easton arrows with Uni Nocks from Cabelas, and want to know if the nock pops out backwards to index it or what? Thanks in advance for the help, I know I can count on this site.
__________________
Born twice,die once! |
#2
|
|||
|
|||
What I do is just snap the arrow onto the string and then rotate the arrow to the desired position. The arrow should spin inside the shaft with no problem, but it does take some effort. Good luck this season, Indyhntr.
__________________
If I get the one I'm after and two more I'll have three. - Ed Zern |
#3
|
|||
|
|||
the nock can be pulled straight out to remove. it can also be turned while in place. I would use a nock tool or pliers to turn the nock. the nock tool is a small plastic device that fits over the nock. if you have a local shop they my have extras.
i would be careful about turning the nock while on the string. it may work fine, but there is a chance of seperating the serving and deforming the nock itself - not always but it can happen. |
Thread Tools | |
Display Modes | |
|
|