Hunt Chat  

Go Back   Hunt Chat > Tools of the Trade > Military/Surplus Arms

Reply
 
Thread Tools Display Modes
  #1  
Old 05-23-2015, 12:04 PM
Adam Helmer Adam Helmer is offline
Moderator
 
Join Date: Jun 2002
Location: Mansfield, PA
Posts: 3,865
Cast bullets in an M1 Garand

Since GI Ball ammo is getting harder to find for shooting my Garands, I decided to try to find a suitable cast bullet load to function my rifles. The Lyman Cast Bullet Handbook says my load is safe.

After a few days of testing on my backyard rifle range here on the farm, I found THE load that shoots to the sights at 100 yards with great accuracy, reliable function and impacts the SAME place as the GI Ball sight setting.

I won't dwell on which cast bullets did not work, rather I found the Lee 312-185 RN cast out of wheeelweights and a dash of tin, water quenched into a bucket of water as dropped from the mould, sized .309, gas checked and loaded to 82MM overall length was the best bullet. My charge is 36 grains of IMR4895 and a CCI LR primer.

This load reliably functions all my Garands, there is no leading and the gas port is no more fouled than with GI Ball. I deem this cast bullet load my "Ball Substitute" and the powder charge is much less than the 49 grain jacketed 150 grain bullet load.

Adam
__________________
Adam Helmer
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:17 PM.


Powered by vBulletin® Version
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.