Hunt Chat  

Go Back   Hunt Chat > Tools of the Trade > Reloading Bench

Reply
 
Thread Tools Display Modes
  #1  
Old 04-18-2005, 06:32 PM
.243hunter .243hunter is offline
 
Join Date: Nov 2004
Location: Boutte,Louisiana
Posts: 69
How deep to seat?

I was wondering how deep i should seat those little 58 grain V- max bullets into the case. thanks for any help. I'm shooting the 243.

Last edited by .243hunter; 04-18-2005 at 07:57 PM.
Reply With Quote
  #2  
Old 04-18-2005, 07:34 PM
Varmint Hunter Varmint Hunter is offline
 
Join Date: Dec 1969
Posts: 194
A rule of thumb.....

Seat the bullets so that there is no less than one bullet diameter (.243 in your case) of bearing surface in the case neck. The boattail does not count because it does not bear against the case neck.

Just my 2 cents - VH
Reply With Quote
  #3  
Old 04-18-2005, 08:49 PM
L. Cooper L. Cooper is offline
Registered User
 
Join Date: Nov 2000
Location: Saskatchewan, Canada
Posts: 299
Varmint Hunter's advice is sound. I break it all the time, however. It's like anything else that has "rules". Once you know why the rule is there, you can break it when the factors that make the rule necessary aren't there.

If you are shooting a single shot rifle there is no real need for that extra "hold" on the bullet. Any time you are going to single load each round, or just know you can be careful with each one (like I can be when I am shooting gophers with my 22-250 from a single spot in a big field) you can load them with less bearing surface and have no troubles.

For all round that will be subject to recoil in the magazine, or rough handling like when hunting, I follow V. H.'s rule about one bullet diameter of bearing surface. The rest of the time I load to the COL that produces the best accuracy and just be careful with them.
Reply With Quote
  #4  
Old 04-18-2005, 09:12 PM
Cal Sibley Cal Sibley is offline
 
Join Date: Nov 2000
Location: Montreal, Quebec, Canada
Posts: 1,389
Not always mind you, but a good rule of thumb seems to be to seat the bullet about a third of the way into the neck. That should be enough to get a good grip on the bullet. Just one mans opinion. Best wishes.

Cal - Montreal
Reply With Quote
  #5  
Old 05-17-2005, 01:46 AM
BLUEDOT 72 BLUEDOT 72 is offline
 
Join Date: Feb 2002
Location: Southern Nevada Shooter & Western USA Hunter
Posts: 85
I like to set the bullet out to "almost touching" the lands. There are several ways on "How you get there". On of the best and easiest is the Stoney Point O.A.L. guage. Another is trial & error method with an unprimed case and seated bullet with some sort of fast drying marker--Dye-Chem or similar. You will need a bullet pulling tool here til you come up with the real deal.
__________________
Jim
Reply With Quote
  #6  
Old 05-21-2005, 03:10 PM
Cal Sibley Cal Sibley is offline
 
Join Date: Nov 2000
Location: Montreal, Quebec, Canada
Posts: 1,389
With some of my calibers I also break some rules. Since most of my shooting is at the bench I can feed the cartridges single shot fashion since I do not have to worry about them clearing the magazine. Then the rule becomes, seat just enough to hold the bullet securely. This is especially true when loading for the newer rifles with their ungodly long chambers, and you're trying to reach the lands. Actually you shouldn't try to reach the lands with some rounds since many shoot their most accurate when they have to jump to the lands. Best wishes.

Cal - Montreal
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:02 PM.


Powered by vBulletin® Version
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.