IMR 4895 Reloading Data?

Esox357 · #1 05-14-2005, 09:53 AM

I just bought a pound of IMR 4895 to use with 165 grain SST's in my 30.06. The problem I encountered is that two of my reloading manuals use H4895 instead. Does anyone have the max and minimum charge weight for 165 grain bullets? Also the nosler data I looked at used the IMR 4895 but didn't state the seating depth for it? I use win brass and win Lg primers. Thanks Esox357

reload · #2 05-14-2005, 11:27 AM

43.0 to 48.5 3.285 OAL 165 SPBT This is a start but not the same bullet you are using. Good Luck!

Esox357 · #3 05-14-2005, 11:49 AM

Thanks for the quick reply. Esox357

Gil Martin · #4 05-14-2005, 02:26 PM

There is a free website with many IMR powder loads at www.imrpowder.com. Hope this helps. All the best...
Gil

Esox357 · #5 05-14-2005, 02:45 PM

Thanks Mr. Martin. I will check it out. Esox357

Gil Martin · #6 05-14-2005, 09:07 PM

Just call me Gil. I think you will like the IMR site. All the best...
Gil

Esox357 · #7 05-15-2005, 08:32 AM

Well do, thanks again Gil. Esox357

Catfish · #8 05-15-2005, 09:02 PM

All of the the powder manufactures have web sights and you can get their data for all of their powders on it. When ever I get a new round to load for I hit all the powder manufactures and print out their data for that round.

Cal Sibley · #9 06-06-2005, 04:46 AM

IMR4895 is one of my favorite all around powders. It has an amazing range of applications. IMR4064 is pretty much the same situation in usage. Best wishes.

Cal - Montreal