|
|
#1
07-06-2005, 11:49 AM
|
||||
|
||||
|
RCBS die ??
I bought a really nice used set of 6mm Rem die set from an estate sale. The box was marked "small base" but the die set only indicates 6mm rem FL RCBS 80...so Im under the ipmression that these are standard. Any input?. RCBS is closed untill the 11th...so im out of luck there. Thanks for any input.
__________________
Go # 24!!!! One to tie and two to pass!!! 
|
|
#2
07-06-2005, 12:49 PM
|
|||
|
|||
|
RCBS small base dies
They are used with automatics,semi-automatic,pump,slide and pump rifles! RCBS doesn't recommend those in bolt action rifles, but have seen people use then anyway. It is your call. Good Luck
|
|
#4
07-06-2005, 01:30 PM
|
||||
|
||||
|
All the actual small base dies I've observed are marked FL XXX SB, so either your box is mismarked, or the previous owner got his size dies mixed up.
He probably bought the standard ones, then decided he needed/wanted the small base and bought those. Somewhere down the line, he put the regular sizer in the SB box. Unless you truly NEED small base dies, the regular FL is what you wanted anyway. What type rifle are you loading for?
__________________
Freedom of the Press Does NOT mean the right to lie! Visit me at my Reloading Room webpage! Get signed copies of my Vietnam novels at "Baggy Zero Four" "Mike Five Eight"
|
|
#6
07-06-2005, 09:33 PM
|
|||
|
|||
|
I'd agree that the die marked FL 80 is a standard full length sizing die. Every RCBS small base die I've seen indicates it's a small base die on it, as Rocky has described.
BTW, the '80' is year of manufacture:1980.
__________________
“May we never confuse honest dissent with disloyal subversion.” Dwight D. Eisenhower "If the freedom of speech is taken away, then dumb and silent we may be led, like sheep to the slaughter" George Washington Jack@huntchat.com
|
 |
|
|
Linear Mode
