|
|
#1
12-13-2005, 12:24 PM
|
|||
|
|||
|
Leupold Mounts
What are some thoughts on Leupold scope mounts? The solid base compared to the 2 piece set up. Is the one piece basically for long range stability or to help increase height for a scope with a bigger bell? I don’t think I will need a detachable scope so the standard mounts seem the best way to go. Is the front dovetail ring solid?
__________________
><)})})*< ~ ~~~ ~~ 
|
|
#2
12-13-2005, 02:10 PM
|
|||
|
|||
|
I use Leupold rings and bases on all my rifles and had nothing but good shooting for years with no problems. I use the 2 piece setup on my rifles. I shoot everything from 22-250 to .338 RUM and no failures. I recommend them to friends who ask because I feel that they are good quality mounts.
__________________
hit em' hard and hit'em fast
|
|
#3
12-13-2005, 09:06 PM
|
|||
|
|||
|
Thanks RUM,
Do you just use the standard mounts? I am setting up a Model 70 30-06. This gun was built in 1949 and I will probably set it with a good load for a 165 gr, hunt with a couple years and put it to rest. I have found out that it is worth good sum and pretty much a family heirloom.
__________________
><)})})*< ~ ~~~ ~~
|
|
#4
12-13-2005, 09:56 PM
|
|||
|
|||
|
I use the standard mounts because my objective lenses aren't any larger than 44mm if you go bigger than that you will have to go to a taller mount set up. But the standard mounts should work just fine for your Remington.
__________________
hit em' hard and hit'em fast
|
|
#5
12-13-2005, 11:52 PM
|
|||
|
|||
|
Sounds like I can't go wrong. More than likely, I will have them on there by the end of the week.
Pretiate your time
__________________
><)})})*< ~ ~~~ ~~
|
 |
|
|
Scope Mount Opinion
Linear Mode
