12GA rifle From Hell--

[hubel458]

Here is picture of 28GA FH brass case with the 350gr
Lyman cast slug. It is the slug you cast to use
originally in 20ga shot cups, for slug hunting.
It is nose heavy and will work in smooth bores.
Brass 3.25" cases from Rocky Mtn Cartridge. It
will work in NEF/H&R 28ga modern break action guns
that cost 150 bucks, 26" barrel, you lengthen chamber
for the brass case. Good hunting loads would
be 2000 fps and the gun with a little weight added
and good pad would handle it fine. Had a few guys ask
about 28ga slug shooting, here is away..Ed

[hubel458]

Here is a double projectile load that would make a
good defense load. Two Brenekkes doubled up in RMC
case in the NEF. 85 gr of 4227 pushing 2 one
ounce KO slugs about 1600. Bottom slug has seal.

Also found a way to adapt extra slugs to 10ga. A
515 gr Lyman slug for use in 12ga wadcup, in my
10ga, using thickwall 10ga BPI steel no slit wadcup
shortened and Lyman bottomed out in it, so it
is like a discard on impact sabot slug. Like Lightfield
and Hastings. I shaved the bottom diameter of Lyman
so it would fit tight. Similar deal for 16ga using BPI 16ga
no slit heavy shot cup and 20ga Lyman. Now we have it
so that 2 Lymans can fit 10,12,16,20,28 ga....Ed



PS- I ask all of you for a favor. Would you please go
to the thehighroad.us forums, join in and support them.
The owner has had original Highroad domain stolen from
him and he is in court to get it back. He is in
the right and if you folks show up,good moral support.
And if you can stand it until court rules stay away from
the first highroad and ask your friends to do the same.