12GA rifle From Hell--

[hubel458]

Here is picture of the US-S slugs in a lineup
with other 12ga slugs I'm testing. Lefteris was
kind enough to send me a few of each weight
to test. They are the 3 in second row on the right.
They are 570gr, 700 gr, 970 gr. I tested 570gr in
3.5" plastic so far. At 1900 in the NEF rifled, and
in the 1887 smooth barrel, got 3" group on both.
With peep sights an bad eyes.So the US-S slug
is great in smoothbores, as good as rifled. My
smoothbore on the 1887 is .723" bore at muzzle,
a nice tight fit for smooth slugs. The smooth
bores Lefteris tested them with are .722" muzzle,
and they've already killed 5 wild boars, one shot
kills with the 570gr slug. Also if anyone wants a
heavy smoothbore new 12ga barrel, .722" muzzle,
1.375" outside diameter to make a great slug
gun with slugs like these, and others like the
Brenekkes, I have spare one. The US-S slugs
are smoothbore accurate in my 87 like the
Brenekke KOs.In the picture the left two cases
are 3.5" Fiocchi with the Fiocchi magnum primers.
I compared that primer to the REM 209 primer and
it has about the same strength.Next two are FED 3.5".
then 2 12GA FH 3.85" cases, then 3.5" RMC brass, then
3" RMC brass, the 2 WIN 3.5", then 2 REM 3.5".ED

[hubel458]

I got the 700H 3.25 case feeding from the magazine I set
up on the Montana Rifle Co PH action. It is singlestack with
feed lips similiar to 12ga shotgun clip style magazines I
had here. Works great, shown in first picture. Now it is longer
than regular 12ga mags, but same setup would do for feeding
long brass 12GA FH and long MRC 12ga cases. The
700H 3.25 is 3.9 inches overall loaded length. In picture
case is ready to clear the mag lips, then rim pops up under
extracter as bolt is moving forward. Second picture is
the box used that I made out of two PH boxes. That allowed
for extra height and fit for singlestack and riveted together.
Used a Savage 210 12ga follower and spring. ED

[hubel458]

The 700gr US-S slug in smoothbore, at 2000
in a 3.5" brass case, got a 2.5" 3 shot group
at 50 yds. Great slugs they have come up with
for smoothbores.
Some of us talking about getting 10 ga rifled
barrels made, here is a picture of my 4.1" long
brass 10ga I made from 50cal Russian by putting
on a rim like the 12GA FH is built.Just a prototype,
third in picture. Later I'll get RMC to make some,
as it is much easier way. First in picture is
16GA FH 3.5" long, 2nd 12GA FH 3.85" long,
3rd 10GA FH 3.1" long, 4th 8GA FH 4.3" long.Ed

[hubel458]

Here is picture of the 12ga belted cases I made to
test a few loads in. I made it from 55cal belted
Boys case. I reduced belt diameter a little and left
the base the same, which is 12ga size.In picture
first is 55cal, second expanded to .620", third
expanded to .660"(16ga), then two 12 ga ones.
Next is our 12GA FH, and then a 12ga 3.5"
plastic case.A little work in long 12ga FH chamber
with a tool for belt step and it chambers. Ed